Some other news I missed.  At the meeting I repeated the old recommendation not to power a Pi off the same hub the USB ports are connected to.  Our last order of Pis were Rev 03 which include the following release note:<br>
<br><p><strong>USB Output Power</strong></p>
<p>The resetable fuses protecting the USB outputs have been removed. 
This feature was implemented on some later revision 1.0 PCBs by 
replacing the fuses with links; revision 2.0 permanently implements this
 modification. It is now possible to reliably power the RPI from a USB 
hub that back feeds power, but it is important that the chosen hub 
cannot supply more than 2.5A under fault conditions.</p><p><br></p><p>Here's the dump off my board:</p><p>matt@blackberry:83% cat /proc/cpuinfo<br>Processor       : ARMv6-compatible processor rev 7 (v6l)<br>BogoMIPS        : 697.95<br>
Features        : swp half thumb fastmult vfp edsp java tls <br>CPU implementer : 0x41<br>CPU architecture: 7<br>CPU variant     : 0x0<br>CPU part        : 0xb76<br>CPU revision    : 7<br>Hardware        : BCM2708<br>Revision        : 0003<br>
Serial          : 00000000bdb59d50<br><br></p>Hopefully the rev 4 boards (with mounting holes and 'Made in UK' screening) will be shipped with our new order.<br><br>Matt<br><br clear="all"><br>