[SGVLUG] new DSL configuration

Claude Felizardo cafelizardo at gmail.com
Wed Sep 25 18:32:43 PDT 2013


Wow they were prompt.  My activation time was scheduled for 11 am so I
opted to stay home and swap things as necessary.  Email reply from
DSLExtreme tech support this at 9 am said I would have to use my own router
and leave the modem in bridge mode.

So I booted up my old RT-311 router after trying a dozen passwords and
started trying to change the configuration to work with DHCP.  Internet
connection died about 11:05 as did the phone.  Modem sync light flashing
red.  Moved telephone line over to the new modem and it got sync within
10-15 minutes?   Couldn't get the router to work so I connected the modem
to one of the desktops and eventually got that working after a factory
reboot which put it back to bridge mode and DHCP.  Got dial tone and was
able to call out about 11:24 and the caller Id seemed to look good but when
I tried to call the home number it just rang.  A few minutes later I was
able to call in and out w/o problems.  Maybe the tech was just wiring it in
and I managed to zap him with bell ringing current and voltage; :)
 Eventually got my old router working by configuring it to use DHCP and
just wait a while for the modem to hand out an IP.  The problem is some of
this stuff won't allow you to access or save certain settings until the
current step is completed.  Got enough working so my family would have
access when they got home.

Just as I'm leaving, I got an email reply from a tier 2 support tech saying
to reconfigure my 2-wire modem for DHCP. I'll try that when I get home
tonight just to confirm that my original modem will work.  Otherwise, I
still want to see about using the new modem in non bridge mode and use it
as a router which has got to be better than my 14 year router.

Also need to see about getting my IP updated via DynDNS.  IIRC, my old
router was using an older API that might not be supported anymore.

Claude



On Wed, Sep 25, 2013 at 4:53 PM, Jess Bermudes <jbermudes at gmail.com> wrote:

> I do remember having to go through that bridge-mode stuff when I first
> signed up. I could take a look and see what settings it's set to if that
> would help but I'm not sure if there's some specific data in there that's
> geared toward my regular DSL service as I'm not on Fusion.
>
> Also I should note that I brought my own modem when I signed up so I've
> been using an old SpeedStream 4100 that connects to my WRT54GL running
> Tomato to do all the other fancy stuff. Although come to think of it, I'm
> not doing anything terribly fancy with it to begin with.
>
>
> On Wed, Sep 25, 2013 at 10:50 AM, Claude Felizardo <cafelizardo at gmail.com>wrote:
>
>> I decided to opt out of static for now, thought I'd make use of the
>> DynDNS account i signed up for years ago will work.  Looks like the modem
>> will support IF i disable bridge mode.
>>
>> My original firewall was a DIY Linux box, did that once, worked fine
>> until the computer overheated in the closet.  Having to deal with two
>> networks cards was a pain.  Much prefer COTS solutions now.  While I do
>> have a linux fileserver still, I'd rather not put it in the middle.
>> Besides, I'm not sure if I have NIC that would work in that computer.
>>
>>
>> On Wed, Sep 25, 2013 at 10:41 AM, John Kreznar <jek at ininx.com> wrote:
>>
>>> In a mail purported to be from Claude Felizardo <cafelizardo at gmail.com>
>>> but lacking a digital signature, it is written:
>>>
>>>
>>> > Okay, I have signed up for DSLExtreme fusion, DHCP.
>>>
>>> Thanks for the update!  Please keep us posted.
>>>
>>>
>>> > I had a static IP before so the configuration is much different.
>>>
>>> Is static not available with fusion, or did you not opt for it?
>>>
>>>
>>> > I can connect to the new modem but attempts to configure it for a
>>> > static IP and DHCP were failing.  I could get it to sync but not dish
>>> > out IPs.  I suppose I could use my original Netgear RT-311 from 14
>>> > years ago.
>>>
>>> Keep in mind too that a Linux box positioned as a gateway can do these
>>> functions -- and give you more flexibility.
>>>
>>> --
>>> OpenPGP key: http://ininx.com
>>>  John E. Kreznar jek at ininx.com 9F1148454619A5F08550 705961A47CC541AFEF13
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sgvlug.net/pipermail/sgvlug/attachments/20130925/828c23e1/attachment.html>


More information about the SGVLUG mailing list